Carpenter & joiners near N5 from £21 per hour

Need to repair bottom part of 2 sash windows. On the outside where the glass meets the wood. Wood have chipped away all along the bottom.

Install a cat flap in a wall

We are looking for a skilled carpenter able to build soundproofing stud walls , room in a room , sliding door and able to deal with plasterboard for a recording studio in Camden.

2 kitchen worktops cut to size and a hole for sink and hole for hob and put on

I need a bedroom door and handle supplied and fitted. I will need up to six other doors supplied and fitted if satisfied with the job

Build book shelves in alcove unit

Cut out and remove existing door and frame. Adapt existing opening and fit new front door and frame. Fit night latch, mortise lock and letterbox

Install a new 30 minute fire door (FD30) to the kitchen and living room. The door to be hung on 3No, stainless steel hinges and an intumescent fire (and smoke) seal to be installed to the perimeter of the door or door frame). Seal glass panel above/adjacent to the door which will need to be upgraded to the same standard and incorporate an intumescent seal to its perimeter.

Hi. We are looking for building storage shelves in two cupboards. One cupboard being roughly with 110cm wide with two to 3 shelves to store luggage and other packages + an additional cupboard 65 cm ish with one to two shelves and a bar for clothe hanger. We are based in Hackney Thanks in advance

Just looking for approx 1x day to help with snagging in office/studio space. Looking for a small shelf fitted and microwave shelf to be fitted. A door to go on kitchen cabinet. A couple of small snagging jobs on kitchen fit. Secure skirting, align doors, etc. All materials - brackets, wood, door skirting, etc. - have been procured and are on site ready. thanks

Replace broken bathroom door, lock and handle

Small handyman type work, competition of existing work from builder who injured himself and disappeared.

Wooden floor for two rooms

Build tv entertainment wall

My closet needs to be reshelved, a few walls inside removed and a meta bar installed. The framing is all there, it just needs to be reassembled to be more useful