Carpenter & joiners near IG6 from £21 per hour

Build day bed carcass 2,2m x 1,6m

I’m looking to change my existing solid wood bed into a storage bed, it’s very low so it would need some height added on both ends of the bed to allow any modifications. I would appreciate a call back on 07904414934 to discuss my enquiry further. Thank you, Rahina

I’m looking to change my existing solid wood bed into a storage bed, it’s very low so it would need some height added on both ends of the bed to allow any modifications. I would appreciate a call back on 07904414934 to discuss my enquiry further. Thank you, Rahina

Handle lock fitting at bathroom door

Bath Door lock fitting And

Hello, I am looking for someone to make and fit 2 cabinets into my asymmetrical alcoves, plus 3 floating shelves above the cabinets on each side(to be painted a dark grey. same as the wall) Total = 2 cabinets, 6 shelves The cabinet on the left has to have a gap in the back to allow for socket access. I also need an opening for cables on the top of the cabinet. Width of alcoves is...

Cutting out and replacing rotten wood from glazed doors.

Fix freezer cabinet and close the gap between my flooring and the sides

Wooden staircase is creaking a lot when being stepped on. This located on the 2nd floor of the house

Fix leaking window sills

Peg board on wall. Size 202x154cm

Spot clean down ( meths and fine wirewool) waterstained previously sanding sealant and Briwaxed 1880 pine doors (10 doors both sides) and reapply Briwax. Same to three shelves both sides and kitchen pine dresser top. 2 days work? Please note that not all sides are damaged and most water damage is on approx 1/2 of door face area.

4 Floating shelves 1m 4 Floating shelves 1.4m

4 Floating shelves 1m 4 Floating shelves 1.4m

We are looking for a quote to cut a number The brief is as follows: A. 1. 3no 1200x2400mm birch (furniture grade) plywood sheets made of 2no. layer 18mm ply sheets glued together. So 6no. sheets glued to be 3no. 2.Cut the sheets into strips and polish edges - 80no. 50mmWx1300mmH; 2no. 50mmWx 1100mmH; 2no. 50mmWx1600mm B. 1. cut sheet and polis sides - 800mmW x 2300mmH ...