Heating engineers near RH7 from £32 per hour

HaMuch is Excellent

from 180 to 200 of 439

LowAverageHigh
£32£55£79
Average hourly rate from 439 heating engineers in RH7 ex VAT or callout

Heating Engineer: Average Hourly and Daily Rates around RH7

clear on price Heating Engineer
Heating Engineer: Average Hourly and Daily Rates around RH7 (excluding VAT or callout charges)
Location in UKHourly RateDaily Rate
Heating Engineer near Mid Sussex£52£278
Heating Engineer near Sevenoaks£53£271
Heating Engineer near Reigate & Banstead£59£291
Heating Engineer near Horsham£53£271
Heating Engineer near Wealden£48£269
Heating Engineer near Elmbridge£59£294
Heating Engineer near London£57£291
Heating Engineer near Maidstone£46£260
Heating Engineer near Guildford£57£298
Heating Engineer near Brighton£48£269

Find hourly & daily prices for Heating Engineers in the UK

Jobs for Heating Engineers near RH7

Hi everyone, We have an Ideal Logic Max Combi 30 (sourced from ScrewFix) and are looking for an engineer to fit it. If you are Gas Safe registered we would welcome a quote for a fitting in BR" 7NF. Thanks all. Michael

Buttons are frozen on the thermostat cannot turn on heating

Buttons are frozen on the thermostat

Central heating radiator not working on ground floor, boiler works ok at first floor.

Need to install a free standing gas cooker. There is gas connection in the property but there was no cooker previously, so a new gas pipe will be needed from the gas meter to cooker. Gas meter is 120cm (4ft) from the intended cooker location. The gap pipe to the cooker can easily go under the kitchen cabinet (no drilling required). See picture - thumb pointing to gas meter location...

Fit thermostatic radiator valves, Danfoss RAS-C2

I have a Wi-Fi Heatmiser system installed in my house. I need an engineer who knows about this system for when it fails, as it has done this weekend, leaving me without heating or hot water over the weekend because the thermostats are offline.

Annual Boiler service

Soldering a small leak in pipework, fitting a new immersion heater element whilst in situ, replace cylinder pump and valve.

Connect a gas cooker or hob

Boiler not working not hot whater and heating

I would like an old gas hob replacing with a new one. It should be a straightforward installation. I don't know if the existing aperture in our kitchen work-top will need resizing, though.

Fit or replace an unvented hot water cylinder

Connect a gas cooker or hob

We are moving into a new house which needs a chimney lining so at the moment are just looking at quotes to see if we can afford to have it done now or whether it’s a job to save for later. Thanks for your help.

Want to see the latest heating engineer jobs?

People in RH7 searching for a Heating Engineer also viewed...

The Largest Database of UK Trade Rates

At HaMuch we know what tradespeople charge because we have the largest database of rates anywhere in the UK. If you want quotes for jobs at the right price for you, post your jobs with HaMuch and get your home improvements kickstarted straight away!