Build dormer shell with stair case

Under stairs storage 1225m long x 900mm deep wanting 3 pull out draws and all in a melamine white

Hall cupboard door is stuck shut. Boiler is inside this cupboard. Handle has been pulled off whilst trying to open it.

Replacing floorboards

Under stairs storage, pull out cupboards

Replacing floorboards

Hang 5 hardwood doors and fit furniture

Under stairs storage

Loft boarding

Fitted wardrobes

Design and fit alcove storage

Need to have living room with the new panelling. Can you please send your contact as I need other jobs as well

Build single loft bed

Under stairs storage

New staircase and bannister

New staircase and bannister

3 showers in house have water leakage with resultant rotten areas outside shower. One shower has more issues and needs completely removed. Strip out shower, repair damp joists and flooring, reinstall shower tray, replace enclosure, replace tiling and flooring. Repair ceiling in kitchen below upstairs showers Several internal wooden doors need planing/ rehanging . Fit new internal glass door and side panel to hall/ front room opening. Secure wobbly balustrade on landing Secure loose dishwasher door Secure loose skirting 2 rooms and seal draughts. Would look at overall price or daily rate.

Wooden floor restoration

Skirting boards, door frames and architrave

Replace stair banister and spindles Open up under stairs and build cupboards

Shave 2 bedroom door’s as we have just had a carpet fitted

Looking for a joiner to fit flooring. Engineered wood flooring needs to be fitted in a 2 bed flat, in living room, x2 bedrooms, kitchen and hall.

Looking to get a door put in from living room to hall

To put flooring in a 2 bedroom flat. Engineered wood flooring to be put in living room, x2 bedrooms, hall and kitchen.

Fitted bookcase 228cm H 416cm W 17cm D

Under stairs storage

Lay wooden floor in room approx 5,18 metres x 3 .96 metres and also in hallway. Fix new skirting boards to room and re fix to wall 4 shelves Looking to get work done in approx week begginging 18th March Noel Holdstock

I need trimming of doors as I have had new carpets fitted, doors need to be installed back. They are 4 internal normal doors. Thank you!

Design and fit alcove storage

Retail unit address: 8, Peascod Street, Windsor, SL4 1DT Iris Galerie (www.irisgalerie.com) are opening a gallery in Windsor (the first of a number of stores to open this year) and we require shop fitting services to the ground floor sales area and frontage/fascia. The unit is already in good white box condition (not structural work required), so this project is relatively straightforward. We plan to have access to the unit w/c 04th March and would like to be ready to open on Friday 22nd March.

Under stairs storage

Entire upstairs of house, 4 bedrooms one corridor. Room by room, remove furniture to adjoing rooms, remove carpet and skirting boards and lay laminate floor. Total area - 80m2

Fitting out a shop

New staircase and bannister

Design and fit alcove storage

Under stairs storage

Under stairs storage

Loft boarding and leather

Hi, to measure, make? supply & fit 7 fitted wardrobe doors only, similar to shaker with sculptured edges across one wall from floor to ceiling to replace 7 old wardrobe doors & 7 top wardrobe cupboards or similar. Thank you.

Looking to get a curtain plate fitted and curtain pole

Build flat pack wordrobe

Fitted bookcase with doors

Add additional bracing/ strapping to roof trusses

Loft boarding

Hi j was looking to get some under stair storage just under the first two steps please how much would I be looking at,m. I was wanting the first two steps to lift up.

Restaurant bar fit out

Under stairs storage

Want banister balustrade and spindles updating

We are looking for fitted wardrobes with a top box storage section in our master bedroom. The wardrobes would go the length of the room, about 4.15m with a ceiling height of 2.7m. The wall at the back of the wardrobes is slightly slanted, so we want to use the wardrobes to square off the room. We would want a mix of hanging, drawer, shoe storage and shelves. We are ideally looking for sliding doors, with hinged doors for the top box section, if that is possible.

Good morning - I'm looking to replace my banister. It consists of an upper and lower section. The lower section consists of a long diagonal section (125cm) followed by a horizontal section at the top (83cm). The upper section is all horizontal (188cm including posts at either end, 173cm excluding posts) and runs the length of the short balcony. We would like a new wooden banister, most likely with plain spindles. Are you able to quote for this please?

Hanging fire doors and fittings handles and hinges

Reception desk 1600x1600 right hand L shape two tier at the front .

Fitted wardrobes

Fitted wardrobes

Box in pipes

I hope this email finds you well. My name is Ali, and I represent a start-up in the pre-launch phase based in the UK. We are currently developing an innovative digital frame product that combines cutting-edge technology with elegant design elements. We are reaching out to explore the possibility of working with you to create our wooden frame that will sit around the display (similar to a traditional art frame). Our digital frame consists of fragile hardware. Given the delicate nature of the display, we have devised a solution to create a 1:1 scale mold of the digital display, which we will provide to the woodworker for reference (we are also open to suggestions if you can offer this as a service). The woodworker's role will involve creating a wooden frame based on the specifications outlined in the provided STEP file and drawings (3D renders). Each join of the frame will be meticulously detailed, including our logo carved into all four corners. It's important to note that this collaboration is specifically for our prototype, intended to showcase the concept to potential. While we understand the importance of quality craftsmanship, for this initial phase, we do not require the highest quality wood. Instead, our focus is on creating a functional and visually appealing prototype that accurately represents our vision. If you are interested in working with us on this project, we would greatly appreciate the opportunity to discuss further details, including timelines, pricing, and logistics. Thank you for considering our proposal, and we look forward to hearing from you soon. further information you may need or if something does not make sense to you in this email. Kind regards, Ali

Bespoke radiator cover

Wooden floorboards - fitting in a flat

Bespoke radiator cover

Multiple carpentry jobs - I need a built in wardrobe, shelving and re-modelling empty storage area. Thank you