Name: Heating Engineer
Brand: HaMuch
SKU: heating-engineer
Rating: 4.5 (20 reviews)

Find affordable M27 heating engineers

Prices range from cheapest £36/hour and £245/day (Tom Prince Plumbing & Heating) to £81/hour and £438/day (Heys Plumbing) - average £50/hr and £296/day

HaMuch is Excellent

Local M27 heating engineers & recently posted jobs

"Boiler service" - M30, job posted 02/09/26

"Fit or replace a vented hot water cylinder - Telford 1500×450 Solar Twin Coil Indirect Vented Copper Cylinder" - OLD TRAFFORD, job posted 28/08/26

"Fit underfloor heating - ProWarm Water Underfloor Heating - Standard Output 20m²" - SALFORD, job posted 28/08/26

"Fit underfloor heating - Wavin Hep2O Water Underfloor Heating - Multi Room" - SALFORD, job posted 28/08/26

"Boiler service" - M27, job posted 27/08/26

"Fit thermostatic radiator valves, Danfoss RAS-C2 - Danfoss RAS-D² 10/15mm x 1/2" Thermostatic Radiator Valve" - WHITEFIELD, job posted 27/08/26

"Install a ground source heat pump - CTC EcoPart 412 12kW 400V Ground Source Heat Pump" - CHEETWOOD, job posted 27/08/26

"Install a ground source heat pump - Vaillant flexoTHERM 0020 25xx x heat pump 400V 15kW" - CHEETWOOD, job posted 27/08/26

"Install an air source heat pump - Vaillant Arotherm plus 12kW Unitower hot water cylinder" - SALFORD, job posted 27/08/26

"Boiler service" - M45, job posted 26/08/26

"Fit a radiator - Flomasta White Type 22 Double Panel Radiator 1200mm x 600mm" - STRETFORD, job posted 26/08/26

"Replace a hot water immersion heater - Pumb Quip 11 Inch 3kW Copper Immersion Heater" - STRETFORD, job posted 26/08/26

"Replace an oil boiler - Mistral CBH7 Condensing Boiler House Heat Only Regular Oil Boiler 58-68kW" - OLD TRAFFORD, job posted 26/08/26

"Replace an oil boiler - Worcester Bosch Greenstar Heatslave II External 25/32 Combination Oil Boiler" - OLD TRAFFORD, job posted 26/08/26

"Central heating circulator pump replacement - Grundfos UPS3 15-50/65 Heating Circulator Pump" - OLD TRAFFORD, job posted 25/08/26

"Fit or replace an unvented hot water cylinder - RM Cylinders Indirect Pre-Plumbed Unvented Single Zone Cylinder 300Ltr" - CHESTER, job posted 25/08/26

"Install a ground source heat pump - CTC EcoPart 412 12kW 400V Ground Source Heat Pump" - WHITEFIELD, job posted 25/08/26

"Install a ground source heat pump - Mitsubishi Electric Ecodan CRHV-P600YA-H Monobloc Ground / Water Source Heat Pump 60Kw" - WHITEFIELD, job posted 25/08/26

"Install a ground source heat pump - Vaillant flexoTHERM 0020 25xx x heat pump 400V 15kW" - PRESTWICH, job posted 25/08/26

"Install an air source heat pump - Panasonic Aquarea All In One Air to Water Heat Pump 7kW" - ECCLES, job posted 25/08/26

What are the best ways to avoid problems when paying the Heating Engineer?

The most important thing is do avoid handing over cash or paying large sums in advance. Be wary of paying cash for a cheaper job, i.e. to avoid VAT, you may be going down a slippery slope of not doing things properly which may eventually mean your job is also not done properly.

Agree when you intend to pay, ideally after you are satisfied with the completed job. If it is a big job agree a schedule of staged payments which is fair to both parties.

To avoid bad tradespeople and to ensure you can find them should they not answer a mobile;

Get proper contact details and check them yourself
Check if the company is verified on the Companies House website
Get phone details, ideally a land line or 0800 number and check it
Get a physical office address

Before the job starts should I agree standards of quality and behaviour?

Get quotes in writing by email or in person if possible. Getting quotes online or by text is ok (make sure you accept the offer by replying). For large projects make a written agreement, schedule of works and snagging plans as part of a working document. Also;

Agree expected quality of workmanship and materials in advance
When will work start and when will project be finished, what happens if project over runs ?
How long is the guarantee on work and materials eg 12 months
Discuss onsite behaviour in advance (no smoking, swearing or using mobile phones for non-work purposes)
Agree that your Heating Engineer will remove all debris and rubbish and what level of tidying up you want after job

Compare M27 heating engineers rates

Compare M27 heating engineers rates (excluding VAT or callout charges)
Location in UK	Hourly Rate	Daily Rate
Heating Engineers near Swinton	£50	£301
Heating Engineers near Eccles	£49	£301
Heating Engineers near Salford	£49	£302
Heating Engineers near Prestwich	£50	£294
Heating Engineers near Whitefield	£49	£288
Heating Engineers near Radcliffe	£49	£287
Heating Engineers near Farnworth	£48	£286
Heating Engineers near Little Hulton	£48	£287
Heating Engineers near Urmston	£49	£310
Heating Engineers near Manchester	£49	£303

Job estimates from heating engineers near you

With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.

Need a Landlord gas safety certificate - £80

Boiler Insurance - £110 per month

Install heated skirting boards - £1,290

LPG boiler installation - £1,426

Install biomass boiler - £5,185

Install hydrogen boiler - £1,180

Install chimney liner - £481

Install gas fire - £754

Service a gas fire - £150

Cost to move / relocate boiler - £885

Fit a magnetic filter - £142

Connect a gas cooker or hob - £162

Central heating circulator pump replacement - £277

Replace an oil boiler - £2,488

Heating oil tank installation - £1,205

Install an air source heat pump - £6,207

Install a ground source heat pump - £14,238

Fit underfloor heating - £1,118

Fix a boiler fault code - £100

Powerflush - £453 Visit

Replace a heating programmer - £205

Fit smart heating controls - £235

Fit a radiator - £164

Replace a hot water immersion heater - £323

Boiler repair - £120

Boiler service - £80

Fit a heated towel rail radiator - £194

Fit or replace an unvented hot water cylinder - £2,259

Install a new boiler - £1,508

Fit or replace a vented hot water cylinder - £581

Fit thermostatic radiator valves, Danfoss RAS-C2 - £131

More heating cost guides...

People in M27 searching for a Heating Engineer also viewed...

Painter and Decorator

The Largest Database of UK Trade Rates

At HaMuch we know what tradespeople charge because we have the largest database of rates anywhere in the UK. If you want quotes for jobs at the right price for you, post your jobs with HaMuch and get your home improvements kickstarted straight away!

Appliance Repair Specialist

Conservatory Specialist