Name: Heating Engineer
Brand: HaMuch
SKU: heating-engineer
Rating: 4.88 (4 reviews)

Find affordable TR1 heating engineers - average £39/hr

Prices range from cheapest £25/hour and £200/day (P.R James And Sons) to £50/hour and £265/day (Azure Heating & Plumbing Ltd)

Local TR1 heating engineers

"Install chimney liner" - CLARE, TR1

"Fit smart heating controls" - TR1

"Having British gas out to remove meter needs us to remove internal pipework - just the connecting part to meter to be capped off. Commercial premises" - BETHANY, TR1

"Greenstar 37ci combi boiler leaking from a plastic sleeve on a brass component inside the boiler" - BETHANY, TR1

What are the best ways to avoid problems when paying the Heating Engineer?

The most important thing is do avoid handing over cash or paying large sums in advance. Be wary of paying cash for a cheaper job, i.e. to avoid VAT, you may be going down a slippery slope of not doing things properly which may eventually mean your job is also not done properly.

Agree when you intend to pay, ideally after you are satisfied with the completed job. If it is a big job agree a schedule of staged payments which is fair to both parties.

To avoid bad tradespeople and to ensure you can find them should they not answer a mobile;

Get proper contact details and check them yourself
Check if the company is verified on the Companies House website
Get phone details, ideally a land line or 0800 number and check it
Get a physical office address

Before the job starts should I agree standards of quality and behaviour?

Get quotes in writing by email or in person if possible. Getting quotes online or by text is ok (make sure you accept the offer by replying). For large projects make a written agreement, schedule of works and snagging plans as part of a working document. Also;

Agree expected quality of workmanship and materials in advance
When will work start and when will project be finished, what happens if project over runs ?
How long is the guarantee on work and materials eg 12 months
Discuss onsite behaviour in advance (no smoking, swearing or using mobile phones for non-work purposes)
Agree that your Heating Engineer will remove all debris and rubbish and what level of tidying up you want after job

Compare TR1 heating engineers rates

Compare TR1 heating engineers rates (excluding VAT or callout charges)
Location in UK	Hourly Rate	Daily Rate
Heating Engineers near Truro	£39	£247
Heating Engineers near Falmouth	£46	£257
Heating Engineers near Newquay	£34	£248
Heating Engineers near Camborne	£37	£235
Heating Engineers near St Austell	£35	£268
Heating Engineers near St Ives, Cornwall	£36	£239

Job estimates from heating engineers near you

With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.

Need a Landlord gas safety certificate - £69

Boiler Insurance - £5 per month

Install heated skirting boards - £1,190

LPG boiler installation - £1,326

Install biomass boiler - £5,035

Install hydrogen boiler - £980

Install chimney liner - £431

Install gas fire - £704

Service a gas fire - £117

Cost to move / relocate boiler - £735

Fit a magnetic filter - £120

Connect a gas cooker or hob - £129

Central heating circulator pump replacement - £244

Replace an oil boiler - £2,388

Heating oil tank installation - £1,155

Install an air source heat pump - £6,107

Install a ground source heat pump - £13,488

Fit underfloor heating - £1,018

Fix a boiler fault code - £78

Powerflush - £376 Visit

Replace a heating programmer - £194

Fit smart heating controls - £213

Fit a radiator - £142

Replace a hot water immersion heater - £273

Boiler repair - £98

Boiler service - £69

Fit a heated towel rail radiator - £161

Fit or replace an unvented hot water cylinder - £2,159

New boiler installation - £1,408

Fit or replace a vented hot water cylinder - £531

Fit thermostatic radiator valves, Danfoss RAS-C2 - £109

More heating cost guides...

People in TR1 searching for a Heating Engineer also viewed...

Painter and Decorator

The Largest Database of UK Trade Rates

At HaMuch we know what tradespeople charge because we have the largest database of rates anywhere in the UK. If you want quotes for jobs at the right price for you, post your jobs with HaMuch and get your home improvements kickstarted straight away!

Appliance Repair Specialist

Conservatory Specialist