Name: Heating Engineer
Brand: HaMuch
SKU: heating-engineer
Rating: 4.73 (20 reviews)

Need help with a job?

Find affordable SW15 heating engineers

Prices range from cheapest £56/hour and £295/day (Plumbheat Ltd) to £101/hour and £784/day (Kenna Plumbing and Heating) - average £71/hr

HaMuch is Excellent

Local SW15 heating engineers

"Install heated skirting boards - Thermaskirt E infrared radiant heating system (DECO BME) £50 per metre for medium room 3m²" - EARLSFIELD, job posted 26/08/26

"New boiler installation" - SW6, job posted 01/06/26

"Replace a heating programmer" - SW15, job posted 21/05/26

"New boiler installation" - SW6, job posted 01/05/26

"New boiler installation" - SW6, job posted 28/04/26

"Boiler service 12356" - SW6, job posted 23/04/26

"Fit or replace an unvented hot water cylinder - Heatrae Sadia Megaflo Eco Unvented Indirect Hot Water Cylinder - 145 Litre" - SW18, job posted 14/03/26

"Radiators not heating up, just little bit warm" - SW6, job posted 29/01/26

"Annual Service for a Worcester Bosch combi boiler in Putney SW15, London" - SW15, job posted 05/11/25

"Gas hob installation" - SW18, job posted 06/08/25

"I deed to fix my Radiator leak" - SW15, job posted 02/08/25

"Need a heating engineer" - SW19, job posted 20/06/25

"Additional radiator, replacement of a radiator" - SW13, job posted 28/04/25

"New boiler installation" - FULHAM, job posted 24/04/25

"Boiler cuts out after 2 minutes. Pump has probably failed and boiler may need a service" - SW6, job posted 08/04/25

"Underfloor heating not working fully" - SW19, job posted 14/01/25

"Hive thermostats installation needs wiring and wiring simplifying This week in Putney" - SW15, job posted 11/11/24

"Hi, I need to replace an old conventional boiler with a new combi. The boiler is in the kitchen of a two bedroom 3rd floor flat and situated against the outer wall. I was considering a boiler similar to a Worcester Bosch Greenstar 1000 30kW. I would ask that the existing boiler is taken away as..." - SW15, job posted 01/11/24

"Connect a gas hob replacing an existing hob. No need to take the existing hob away. I will dispose" - SW15, job posted 08/10/24

Quickly find a Heating Engineer in SW15

Use these steps to find Heating Engineers in SW15 for FREE!

Post your job: Click "Get quotes" and briefly describe your job.
Enter your details: We’ll match you with Heating Engineers in SW15. We’ll notify you via text or email when a Heating Engineer is available to quote.
Select your Heating Engineer: Compare Heating Engineers interested in working with you. You can use HaMuch to safely message local SW15 Heating Engineers or phone them directly - you’re in control!

What are the best ways to avoid problems when paying the Heating Engineer?

The most important thing is do avoid handing over cash or paying large sums in advance. Be wary of paying cash for a cheaper job, i.e. to avoid VAT, you may be going down a slippery slope of not doing things properly which may eventually mean your job is also not done properly.

Agree when you intend to pay, ideally after you are satisfied with the completed job. If it is a big job agree a schedule of staged payments which is fair to both parties.

To avoid bad tradespeople and to ensure you can find them should they not answer a mobile;

Get proper contact details and check them yourself
Check if the company is verified on the Companies House website
Get phone details, ideally a land line or 0800 number and check it
Get a physical office address

Before the job starts should I agree standards of quality and behaviour?

Get quotes in writing by email or in person if possible. Getting quotes online or by text is ok (make sure you accept the offer by replying). For large projects make a written agreement, schedule of works and snagging plans as part of a working document. Also;

Agree expected quality of workmanship and materials in advance
When will work start and when will project be finished, what happens if project over runs ?
How long is the guarantee on work and materials eg 12 months
Discuss onsite behaviour in advance (no smoking, swearing or using mobile phones for non-work purposes)
Agree that your Heating Engineer will remove all debris and rubbish and what level of tidying up you want after job

Local Heating Engineers in London Boroughs

Local Heating Engineers in London Boroughs
Borough in London
Heating Engineers in Putney
Heating Engineers in Barnes
Heating Engineers in Earlsfield
Heating Engineers in Fulham
Heating Engineers in Mortlake
Heating Engineers in Hammersmith
Heating Engineers in Wimbledon
Heating Engineers in West Brompton
Heating Engineers in West Kensington
Heating Engineers in Battersea

Job estimates from heating engineers near you

With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.

Need a Landlord gas safety certificate - £102

Boiler Insurance - £154 per month

Install heated skirting boards - £1,476

LPG boiler installation - £1,612

Install biomass boiler - £5,464

Install hydrogen boiler - £1,552

Install chimney liner - £574

Install gas fire - £847

Service a gas fire - £216

Cost to move / relocate boiler - £1,164

Fit a magnetic filter - £186

Connect a gas cooker or hob - £228

Central heating circulator pump replacement - £343

Replace an oil boiler - £2,674

Heating oil tank installation - £1,298

Install an air source heat pump - £6,393

Install a ground source heat pump - £15,633

Fit underfloor heating - £1,304

Fix a boiler fault code - £144

Powerflush - £607 Visit

Replace a heating programmer - £227

Fit smart heating controls - £279

Fit a radiator - £208

Replace a hot water immersion heater - £416

Boiler repair - £164

Boiler service - £102

Fit a heated towel rail radiator - £260

Fit or replace an unvented hot water cylinder - £2,445

Install a new boiler - £1,694

Fit or replace a vented hot water cylinder - £674

Fit thermostatic radiator valves, Danfoss RAS-C2 - £175

More heating cost guides...

People in SW15 searching for a Heating Engineer also viewed...

Painter and Decorator

The Largest Database of UK Trade Rates

At HaMuch we know what tradespeople charge because we have the largest database of rates anywhere in the UK. If you want quotes for jobs at the right price for you, post your jobs with HaMuch and get your home improvements kickstarted straight away!

Appliance Repair Specialist

Conservatory Specialist