Name: Heating Engineer
Brand: HaMuch
SKU: heating-engineer
Rating: 4.73 (20 reviews)

Find affordable SE5 heating engineers

Prices range from cheapest £50/hour and £260/day (J M Plumbers) to £83/hour and £424/day (Penton Heating) - average £68/hr and £361/day

HaMuch is Excellent

Local SE5 heating engineers & recently posted jobs

"Fit a heated towel rail radiator - Lux Heat Open Flat Chrome Towel Radiator" - STOCKWELL, job posted 28/08/26

"Fit or replace an unvented hot water cylinder - RM Cylinders Indirect Pre-Plumbed Unvented Single Zone Cylinder 300Ltr" - NINE ELMS, job posted 27/08/26

"Install an air source heat pump - Panasonic Aquarea All In One Air to Water Heat Pump 7kW" - NINE ELMS, job posted 26/08/26

"Boiler service" - SE5, job posted 06/06/26

"Boiler service" - SW9, job posted 03/06/26

"Install an air source heat pump - Panasonic Aquarea All In One Air to Water Heat Pump 7kW" - SE5, job posted 04/04/26

"F28 Error on boiler" - SE1, job posted 29/03/26

"Boiler repair cost for pump, diverter valve or heat exchanger" - SE15, job posted 27/03/26

"LPG boiler installation - Worcester Greenstar 4000 30Kw Combi Lpg Boiler Only" - SE22, job posted 04/03/26

"Central heating circulator pump replacement - Grundfos UPS3 15-50/65 Heating Circulator Pump" - CAMBERWELL, job posted 03/03/26

"Fit a heated towel rail radiator - Lux Heat Anthracite Grey Towel Radiator" - SE14, job posted 27/02/26

"I would like to have my boiler serviced. It is a 2 bedroom flat." - SE1, job posted 22/02/26

"Combi boiler installation for supplying hot water to 2-3 bathrooms. There is no boiler at the moment (vented boiler cylinder in the loft, heated from communal heating, and being cancelled). The plumbing in the house is all new, and both the incoming cold water, as well as the outgoing hot water..." - SE17, job posted 08/12/25

"Boiler has faulyt code flashing" - SW9, job posted 26/11/25

"Fit thermostatic radiator valves, Drayton TRV4 X10" - SE14, job posted 24/11/25

"Boiler failure and installation of new boiler" - SW2, job posted 06/11/25

"Connect a gas cooker or hob" - SE15, job posted 03/10/25

"Combi Boiler glow worm micracom 28kw. install labour only ,flue with kit and magn filter provided. Replacing old boiler same location ready with 22mm gas pipe, drain, flu hole etc" - SW9, job posted 02/09/25

"LPG boiler installation - Baxi 424 24kW Lpg Combi" - ELEPHANT, job posted 18/08/25

Quickly find a Heating Engineer in SE5

Use these steps to find Heating Engineers in SE5 for FREE!

Post your job: Click "Get quotes" and briefly describe your job.
Enter your details: We’ll match you with Heating Engineers in SE5. We’ll notify you via text or email when a Heating Engineer is available to quote.
Select your Heating Engineer: Compare Heating Engineers interested in working with you. You can use HaMuch to safely message local SE5 Heating Engineers or phone them directly - you’re in control!

What are the best ways to avoid problems when paying the Heating Engineer?

The most important thing is do avoid handing over cash or paying large sums in advance. Be wary of paying cash for a cheaper job, i.e. to avoid VAT, you may be going down a slippery slope of not doing things properly which may eventually mean your job is also not done properly.

Agree when you intend to pay, ideally after you are satisfied with the completed job. If it is a big job agree a schedule of staged payments which is fair to both parties.

To avoid bad tradespeople and to ensure you can find them should they not answer a mobile;

Get proper contact details and check them yourself
Check if the company is verified on the Companies House website
Get phone details, ideally a land line or 0800 number and check it
Get a physical office address

Before the job starts should I agree standards of quality and behaviour?

Get quotes in writing by email or in person if possible. Getting quotes online or by text is ok (make sure you accept the offer by replying). For large projects make a written agreement, schedule of works and snagging plans as part of a working document. Also;

Agree expected quality of workmanship and materials in advance
When will work start and when will project be finished, what happens if project over runs ?
How long is the guarantee on work and materials eg 12 months
Discuss onsite behaviour in advance (no smoking, swearing or using mobile phones for non-work purposes)
Agree that your Heating Engineer will remove all debris and rubbish and what level of tidying up you want after job

Local Heating Engineers in London Boroughs

Local Heating Engineers in London Boroughs
Borough in London
Heating Engineers in Camberwell
Heating Engineers in Stockwell
Heating Engineers in Elephant & Castle
Heating Engineers in Peckham
Heating Engineers in Lambeth
Heating Engineers in Herne Hill
Heating Engineers in East Dulwich
Heating Engineers in Bermondsey
Heating Engineers in Nine Elms
Heating Engineers in Brixton

Job estimates from heating engineers near you

With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.

Need a Landlord gas safety certificate - £99

Boiler Insurance - £148 per month

Install heated skirting boards - £1,408

LPG boiler installation - £1,544

Install biomass boiler - £5,362

Install hydrogen boiler - £1,416

Install chimney liner - £540

Install gas fire - £813

Service a gas fire - £207

Cost to move / relocate boiler - £1,062

Fit a magnetic filter - £180

Connect a gas cooker or hob - £219

Central heating circulator pump replacement - £334

Replace an oil boiler - £2,606

Heating oil tank installation - £1,264

Install an air source heat pump - £6,325

Install a ground source heat pump - £15,123

Fit underfloor heating - £1,236

Fix a boiler fault code - £138

Powerflush - £586 Visit

Replace a heating programmer - £224

Fit smart heating controls - £273

Fit a radiator - £202

Replace a hot water immersion heater - £382

Boiler repair - £158

Boiler service - £99

Fit a heated towel rail radiator - £251

Fit or replace an unvented hot water cylinder - £2,377

Install a new boiler - £1,626

Fit or replace a vented hot water cylinder - £640

Fit thermostatic radiator valves, Danfoss RAS-C2 - £169

More heating cost guides...

People in SE5 searching for a Heating Engineer also viewed...

Painter and Decorator

The Largest Database of UK Trade Rates

At HaMuch we know what tradespeople charge because we have the largest database of rates anywhere in the UK. If you want quotes for jobs at the right price for you, post your jobs with HaMuch and get your home improvements kickstarted straight away!

Appliance Repair Specialist

Conservatory Specialist