Name: Heating Engineer
Brand: HaMuch
SKU: heating-engineer
Rating: 4.75 (20 reviews)

Find affordable NW8 heating engineers

Average NW8 heating engineer hourly rate is £64. Prices range from the cheapest £30/hour and £200/day (HORIZON BUILDING MANAGEMENT) to £100/hour and £500/day (Integrity Plumbing & Heating).

Local heating engineers near NW8

"Install chimney liner Ground floor flat, 15M chimney, previously capped. For gas fire. - ANDREW, W2

" This project involves retrofitting a 3rd-floor warehouse conversion with a high-efficiency 8-9kW R32 split air-to-water heat pump and a Sunamp Thermino 210hp thermal battery. It includes a full transition from direct electric heating to a new wet central heating system with high-output radiators... - BENEDIKT, NW8

"Install an air source heat pump - Viessmann Vitocal 151-A 16kW Heat Pump and Cylinder - CITY OF WESTMINSTER

"Install an air source heat pump - LG Therma V R32 S Series 16kW Air-Source Pre-Plumbed Heat Pump Kit 250l - CITY OF WESTMINSTER

"Replace a heating programmer - Drayton LP722 2-Channel Digital Programmer - NOTTING HILL

"New boiler installation - Worcester Bosch Greenstar 8000 45kW Combi Boiler - WC1H

"Install biomass boiler - DEKi, Wood pellet boilers, biomass central heating and hot water 24kW - NOTTING HILL

"New compresor fixed in L G american fridge freezer part work qote please - W2

"Boiler service - NW6

"Fix a neon light batten - SABRI, W9

"Replacement defective thermocouple / flame safety device (FSD) as not working. Gas engineer assessed 10/25. It’s a New World NW701G Stainless Gas Oven. Model No.: 4444 4xxx . Serial No.: 7070 xxx - SUSAN, NW1

" Pawel Wlodarczyk atended 10/25 and keen to progresss mending oven. needs new thermocouple / flame safety device (FSD). address NW1 1EU New World NW701G Stainless Gas Oven Model No.: 4444 4xxx Serial No.: 7070 xxx Fault Report: Oven lights up and reaches full flame when the control... - SUSAN, NW1

"Need help getting 5 radiators synched up to digital TRV (3 already have analog TRV, 2 need swapping from manual). Boiler recently serviced and fine. Digital TRV and the TRVs to replace the manual valves already purchased. - FELICITY, NW6

"Gas safety certification - IJEOMA, NW6

"Boiler service - NW2

"Fit thermostatic radiator valves, Danfoss RAS-C2 - DANFOSS RAS-C² WHITE / CHROME ANGLED TRV - TOTTENHAM COURT ROAD

"Worcester Bosch Greenstar 15Ri boiler with 7 radiators in place, need to Powerflush system - W2

"Powerflush central heating system in a 1 bed flat (4 radiators), and replace condensate trap in a Worcester Bosch Greenstar 25i Boiler - ANDREW, W2

"I would like my gas cooker disconnected/capped off on 15/10/2025 and a new cooker connected on 17/10/2025 - LISA, W10

"To attach my gas hobb so i can start cooking - NIKKI, KENTISH TOWN

Quickly find a Heating Engineer in NW8

Use these steps to find Heating Engineers in NW8 for FREE!

Post your job: Click "Get quotes" and briefly describe your job.
Enter your details: We’ll match you with Heating Engineers in NW8. We’ll notify you via text or email when a Heating Engineer is available to quote.
Select your Heating Engineer: Compare Heating Engineers interested in working with you. You can use HaMuch to safely message local NW8 Heating Engineers or phone them directly - you’re in control!

What are the best ways to avoid problems when paying the Heating Engineer?

The most important thing is do avoid handing over cash or paying large sums in advance. Be wary of paying cash for a cheaper job, i.e. to avoid VAT, you may be going down a slippery slope of not doing things properly which may eventually mean your job is also not done properly.

Agree when you intend to pay, ideally after you are satisfied with the completed job. If it is a big job agree a schedule of staged payments which is fair to both parties.

To avoid bad tradespeople and to ensure you can find them should they not answer a mobile;

Get proper contact details and check them yourself
Check if the company is verified on the Companies House website
Get phone details, ideally a land line or 0800 number and check it
Get a physical office address

Before the job starts should I agree standards of quality and behaviour?

Get quotes in writing by email or in person if possible. Getting quotes online or by text is ok (make sure you accept the offer by replying). For large projects make a written agreement, schedule of works and snagging plans as part of a working document. Also;

Agree expected quality of workmanship and materials in advance
When will work start and when will project be finished, what happens if project over runs ?
How long is the guarantee on work and materials eg 12 months
Discuss onsite behaviour in advance (no smoking, swearing or using mobile phones for non-work purposes)
Agree that your Heating Engineer will remove all debris and rubbish and what level of tidying up you want after job

Local Heating Engineers in London Boroughs

Local Heating Engineers in London Boroughs
Borough in London
Heating Engineers in St John's Wood
Heating Engineers in Maida Vale
Heating Engineers in Marleybone
Heating Engineers in Paddington
Heating Engineers in Kilburn
Heating Engineers in Marleybone
Heating Engineers in Camden Town
Heating Engineers in Paddington
Heating Engineers in Harley Street
Heating Engineers in Primrose Hill

Job estimates from heating engineers near you

With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.

Need a Landlord gas safety certificate - £92

Boiler Insurance - £5 per month

Install heated skirting boards - £1,332

LPG boiler installation - £1,468

Install biomass boiler - £5,248

Install hydrogen boiler - £1,264

Install chimney liner - £502

Install gas fire - £775

Service a gas fire - £186

Cost to move / relocate boiler - £948

Fit a magnetic filter - £166

Connect a gas cooker or hob - £198

Central heating circulator pump replacement - £313

Replace an oil boiler - £2,530

Heating oil tank installation - £1,226

Install an air source heat pump - £6,249

Install a ground source heat pump - £14,553

Fit underfloor heating - £1,160

Fix a boiler fault code - £124

Powerflush - £537 Visit

Replace a heating programmer - £217

Fit smart heating controls - £259

Fit a radiator - £188

Replace a hot water immersion heater - £344

Boiler repair - £144

Boiler service - £92

Fit a heated towel rail radiator - £230

Fit or replace an unvented hot water cylinder - £2,301

New boiler installation - £1,550

Fit or replace a vented hot water cylinder - £602

Fit thermostatic radiator valves, Danfoss RAS-C2 - £155

More heating cost guides...

People in NW8 searching for a Heating Engineer also viewed...

Painter and Decorator

The Largest Database of UK Trade Rates

At HaMuch we know what tradespeople charge because we have the largest database of rates anywhere in the UK. If you want quotes for jobs at the right price for you, post your jobs with HaMuch and get your home improvements kickstarted straight away!

Appliance Repair Specialist

Conservatory Specialist