Name: Heating Engineer
Brand: HaMuch
SKU: heating-engineer
Rating: 4.73 (20 reviews)

Find affordable KT3 heating engineers

Heating engineers rates in KT3 range from £57/hour £295/day (Eco Western Ltd) to £74/hour £420/day (Gavin Clarke). To see prices and availability now for your job click Get quotes.

HaMuch is Excellent

Sort by rates or availability

"Fit or replace a vented hot water cylinder - Telford Indirect 105L Combination Copper Cylinder" - SW2, job posted 08/10/26

"Fit thermostatic radiator valves, Danfoss RAS-C2 - TERRIER WHITE / CHROME ANGLED TRV WITH LOCKSHIELD 15MM X ½"" - SURBITON, job posted 02/10/26

"Install a ground source heat pump - Vaillant flexoTHERM 0020 25xx x heat pump 400V 15kW" - KT35D, job posted 27/08/26

"Fit or replace an unvented hot water cylinder - Joule Zenith Pre-Plumbed Cylinder" - KINGSTON UPON THAMES, job posted 24/08/26

"Fit underfloor heating - Wavin Hep2O Water Underfloor Heating - Multi Room" - KT35D, job posted 20/08/26

"Power flush on new boiler" - SW19, job posted 22/07/26

"New boiler installation and flush" - SW20, job posted 05/06/26

"Install chimney liner - Flames - Complete Flue Liner Kit for Wood & Multi-Fuel Stoves" - SW20, job posted 24/01/26

"Install a Worcester Bosch Greenstar 1000 into a new location in the kitchen on the other side of a wall to where an old boiler is now" - KT4, job posted 08/10/25

"Install a Worcester Bosch Greenstar 1000 into a new location in the kitchen on the other side of a wall to where an old boiler is now" - KT4, job posted 07/10/25

"New boiler installation" - SURBITON, job posted 21/06/25

"New boiler installation" - SURBITON, job posted 20/06/25

"Gas safe engineer to alter some pipe work around my mums valiant wall gas boiler. Then a choppie will make a cabinet door for it. Also need hot and cold supplied to basin below ,toilet and radiator. Not all of that needs to be fitted yet Also need another hot and cold 5.5m appx run in six..." - SM4, job posted 04/01/25

"Fit a magnetic filter" - WORCESTER, job posted 19/10/24

"Install skirting board heating" - KT1, job posted 25/06/24

"A gas cooker needs to be connected." - KT1, job posted 10/06/24

"Disconnect old gas cooker and reconnect a new one" - WORCESTER, job posted 03/05/24

"Replace a heating programmer" - WORCESTER, job posted 10/04/24

"Install new Vaillant ecofit pure erp combi boiler to replace existing combi boiler any time in April" - KT5, job posted 26/02/24

"Fit a radiator" - SURBITON, job posted 17/01/24

Quickly find a Heating Engineer in KT3

Use these steps to find Heating Engineers in KT3 for FREE!

Post your job: Click "Get quotes" and briefly describe your job.
Enter your details: We’ll match you with Heating Engineers in KT3. We’ll notify you via text or email when a Heating Engineer is available to quote.
Select your Heating Engineer: Compare Heating Engineers interested in working with you. You can use HaMuch to safely message local KT3 Heating Engineers or phone them directly - you’re in control!

What are the best ways to avoid problems when paying the Heating Engineer?

The most important thing is do avoid handing over cash or paying large sums in advance. Be wary of paying cash for a cheaper job, i.e. to avoid VAT, you may be going down a slippery slope of not doing things properly which may eventually mean your job is also not done properly.

Agree when you intend to pay, ideally after you are satisfied with the completed job. If it is a big job agree a schedule of staged payments which is fair to both parties.

To avoid bad tradespeople and to ensure you can find them should they not answer a mobile;

Get proper contact details and check them yourself
Check if the company is verified on the Companies House website
Get phone details, ideally a land line or 0800 number and check it
Get a physical office address

Before the job starts should I agree standards of quality and behaviour?

Get quotes in writing by email or in person if possible. Getting quotes online or by text is ok (make sure you accept the offer by replying). For large projects make a written agreement, schedule of works and snagging plans as part of a working document. Also;

Agree expected quality of workmanship and materials in advance
When will work start and when will project be finished, what happens if project over runs ?
How long is the guarantee on work and materials eg 12 months
Discuss onsite behaviour in advance (no smoking, swearing or using mobile phones for non-work purposes)
Agree that your Heating Engineer will remove all debris and rubbish and what level of tidying up you want after job

Local Heating Engineers in London Boroughs

Local Heating Engineers in London Boroughs
Borough in London
Heating Engineers in New Malden
Heating Engineers in Surbiton
Heating Engineers in Merton
Heating Engineers in Worcester Park
Heating Engineers in Kingston Upon Thames
Heating Engineers in Coombe
Heating Engineers in Long Ditton
Heating Engineers in Morden
Heating Engineers in North Cheam
Heating Engineers in Wimbledon

Job estimates from heating engineers near you

With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.

Need a Landlord gas safety certificate - £97

Boiler Insurance - £144 per month

Install heated skirting boards - £1,404

LPG boiler installation - £1,540

Install biomass boiler - £5,356

Install hydrogen boiler - £1,408

Install chimney liner - £538

Install gas fire - £811

Service a gas fire - £201

Cost to move / relocate boiler - £1,056

Fit a magnetic filter - £176

Connect a gas cooker or hob - £213

Central heating circulator pump replacement - £328

Replace an oil boiler - £2,602

Heating oil tank installation - £1,262

Install an air source heat pump - £6,321

Install a ground source heat pump - £15,093

Fit underfloor heating - £1,232

Fix a boiler fault code - £134

Powerflush - £572 Visit

Replace a heating programmer - £222

Fit smart heating controls - £269

Fit a radiator - £198

Replace a hot water immersion heater - £380

Boiler repair - £154

Boiler service - £92

Fit a heated towel rail radiator - £245

Fit or replace an unvented hot water cylinder - £2,373

Install a new boiler - £1,622

Fit or replace a vented hot water cylinder - £638

Fit thermostatic radiator valves, Danfoss RAS-C2 - £165

More heating cost guides...

People in KT3 searching for a Heating Engineer also viewed...

Painter and Decorator

The Largest Database of UK Trade Rates

At HaMuch we know what tradespeople charge because we have the largest database of rates anywhere in the UK. If you want quotes for jobs at the right price for you, post your jobs with HaMuch and get your home improvements kickstarted straight away!

Appliance Repair Specialist

Conservatory Specialist