Name: Heating Engineer
Brand: HaMuch
SKU: heating-engineer
Rating: 4.6 (20 reviews)

Find affordable Horton heating engineers

Heating engineers rates in Horton range from £48/hour £200/day (Dawid Palka & Plumbing) to £114/hour £750/day (PAV Heating and Plumbing). To see prices and availability now for your job click green button.

HaMuch is Excellent

Sort by rates or availability

"Fit or replace a vented hot water cylinder - Telford Indirect 105L Combination Copper Cylinder" - SW2, job posted 08/10/26

"Heating oil tank installation - Atlas Tanks 1900 Litre Bunded Oil Tank" - CHESSINGTON, job posted 05/10/26

"Fit thermostatic radiator valves, Danfoss RAS-C2 - TERRIER WHITE / CHROME ANGLED TRV WITH LOCKSHIELD 15MM X ½"" - SURBITON, job posted 02/10/26

"Boiler service" - KT20, job posted 07/09/26

"Install a ground source heat pump - Vaillant flexoTHERM 0020 25xx x heat pump 400V 15kW" - KT35D, job posted 27/08/26

"Fit thermostatic radiator valves, Danfoss RAS-C2 - DANFOSS RAS-C² WHITE / CHROME ANGLED TRV" - ESHER, job posted 25/08/26

"Fit or replace a vented hot water cylinder - Gledhill Indirect S/Steel Cylinder 815 x 450mm, 120 Litres" - ESHER, job posted 24/08/26

"Fit or replace a vented hot water cylinder - Telford 900 x 450 Indirect Vented Copper Cylinder" - ESHER, job posted 24/08/26

"Fit or replace an unvented hot water cylinder - Joule Zenith Pre-Plumbed Cylinder" - KINGSTON UPON THAMES, job posted 24/08/26

"Heating oil tank installation - Atlas Tanks 2300 Litre Bunded Oil Tank" - THAMES DITTON, job posted 24/08/26

"Install an air source heat pump - Vaillant Arotherm plus 12kW Unitower hot water cylinder" - THAMES DITTON, job posted 24/08/26

"Install an air source heat pump - Viessmann Vitocal 151-A 16kW Heat Pump and Cylinder" - THAMES DITTON, job posted 24/08/26

"Replace a heating programmer - DANFOSS FP715SI PROGRAMMER" - STONELEIGH, job posted 24/08/26

"Fit underfloor heating - Wavin Hep2O Water Underfloor Heating - Multi Room" - KT35D, job posted 20/08/26

"New boiler installation and flush" - SW20, job posted 05/06/26

"Boiler service" - SM7, job posted 07/05/26

"Install chimney liner - Flue Pipes - Flue Liner Kit for Wood and Multifuel Stoves" - KT9, job posted 27/02/26

"Install chimney liner - Flames - Complete Flue Liner Kit for Wood & Multi-Fuel Stoves" - SW20, job posted 24/01/26

"We are getting huge gas bill due to some issues with our heating system, which includes under floor heating. Need to check ." - SM7, job posted 22/12/25

"Kitchen extractor Hood duct is required to replace this duct and the outside vent with a flexible 150mm dia duct or if possible use a rigid ducting system" - SM2, job posted 26/11/25

What are the best ways to avoid problems when paying the Heating Engineer?

The most important thing is do avoid handing over cash or paying large sums in advance. Be wary of paying cash for a cheaper job, i.e. to avoid VAT, you may be going down a slippery slope of not doing things properly which may eventually mean your job is also not done properly.

Agree when you intend to pay, ideally after you are satisfied with the completed job. If it is a big job agree a schedule of staged payments which is fair to both parties.

To avoid bad tradespeople and to ensure you can find them should they not answer a mobile;

Get proper contact details and check them yourself
Check if the company is verified on the Companies House website
Get phone details, ideally a land line or 0800 number and check it
Get a physical office address

Before the job starts should I agree standards of quality and behaviour?

Get quotes in writing by email or in person if possible. Getting quotes online or by text is ok (make sure you accept the offer by replying). For large projects make a written agreement, schedule of works and snagging plans as part of a working document. Also;

Agree expected quality of workmanship and materials in advance
When will work start and when will project be finished, what happens if project over runs ?
How long is the guarantee on work and materials eg 12 months
Discuss onsite behaviour in advance (no smoking, swearing or using mobile phones for non-work purposes)
Agree that your Heating Engineer will remove all debris and rubbish and what level of tidying up you want after job

Compare Horton heating engineers rates

Compare Horton heating engineers rates (excluding VAT or callout charges)
Location in UK	Hourly Rate	Daily Rate
Heating Engineers near Ewell	£70	£353
Heating Engineers near Epsom	£68	£351
Heating Engineers near Sutton	£68	£350
Heating Engineers near Esher	£68	£352
Heating Engineers near Kingston Upon Thames	£70	£372
Heating Engineers near Tadworth	£66	£339
Heating Engineers near Reigate & Banstead	£66	£339
Heating Engineers near West Molesey	£68	£354
Heating Engineers near Richmond Upon Thames	£68	£357
Heating Engineers near Wimbledon	£75	£356

Job estimates from heating engineers near you

With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.

Need a Landlord gas safety certificate - £99

Boiler Insurance - £148 per month

Install heated skirting boards - £1,420

LPG boiler installation - £1,556

Install biomass boiler - £5,380

Install hydrogen boiler - £1,440

Install chimney liner - £546

Install gas fire - £819

Service a gas fire - £207

Cost to move / relocate boiler - £1,080

Fit a magnetic filter - £180

Connect a gas cooker or hob - £219

Central heating circulator pump replacement - £334

Replace an oil boiler - £2,618

Heating oil tank installation - £1,270

Install an air source heat pump - £6,337

Install a ground source heat pump - £15,213

Fit underfloor heating - £1,248

Fix a boiler fault code - £138

Powerflush - £586 Visit

Replace a heating programmer - £224

Fit smart heating controls - £273

Fit a radiator - £202

Replace a hot water immersion heater - £388

Boiler repair - £158

Boiler service - £99

Fit a heated towel rail radiator - £251

Fit or replace an unvented hot water cylinder - £2,389

Install a new boiler - £1,638

Fit or replace a vented hot water cylinder - £646

Fit thermostatic radiator valves, Danfoss RAS-C2 - £169

More heating cost guides...

People in Horton searching for a Heating Engineer also viewed...

Painter and Decorator

The Largest Database of UK Trade Rates

At HaMuch we know what tradespeople charge because we have the largest database of rates anywhere in the UK. If you want quotes for jobs at the right price for you, post your jobs with HaMuch and get your home improvements kickstarted straight away!

Appliance Repair Specialist

Conservatory Specialist