Whether you have an electric, induction or gas hob, it can be hard to imagine life without them. So when they go wrong, it can ruin your dinner plans quickly. 

Luckily, many common issues with hobs can be fixed relatively easily. But how much will it cost? In this guide, we’ll go through the costs of repairing your hob, whether it’s electric, induction or gas, and the most common faults found with each of them. 

How much does it cost to repair a hob?

The cost of hob repair in the UK varies depending on the type of hob (electric, induction, or gas) and the fault. Typical repair costs range between £50 and £300, with more complex issues or premium models incurring higher fees.

Job/service	Average cost
General fault diagnosis	£65
Electric hob repairs	£50-£200
Supply and fit new heating element	£75
Supply and fit new thermostat	£115
Induction hob repairs	£100-£300
Supply and fit new coil	£185
Gas hob repairs	£60-£200
Supply and fit new flame head	£120
Supply and fit new spark module	£150
Supply and fit new ignition switch	£85

Factors that affect the cost of hob repairs

There are a few factors that can affect the cost of your hob repairs:

• Type of hob: Induction hobs generally cost more to repair than electric or gas models due to their advanced technology.
• Fault complexity: Simple issues like replacing a knob are cheaper than fixing an induction hob’s electronics.
• Brand and model: Premium brands such as Neff or Miele may have more expensive replacement parts.
• Age of appliance: Older hobs may require harder-to-source components, increasing costs.
• Location: Labour rates vary by region. We tend to see higher rates in London and the South East, and lower in northern parts of the UK.

Common reasons why hobs stop working

If you can give your appliance repair specialist an idea of why your hob has stopped working, it can help them diagnose the problem sooner and potentially save you money. Here are some of the most common faults with hobs:

Electric

• Circuit tripping: Often caused by damaged wiring or a short circuit in the hob. Repairs may cost £60-£150.
• Not heating: Faulty heating elements are a common issue, with replacement costs around £50-£100.
• Not responding to temperature change: Likely due to a malfunctioning thermostat, costing approximately £80-£150 to repair.

Induction

• Won’t turn on: Can be caused by a faulty power supply or internal wiring, costing £100-£200 to repair.
• LED display constantly flashes: Indicates a control board issue or power fluctuation, with repair costs of £150–£300.
• Hob rings not heating effectively: Likely due to a coil problem, costing £120-£250.
• Not cooking food evenly: Could stem from faulty sensors or an electrical fault, which ranges from £100-£200 for repair.

Gas

• Rings not lighting: Often caused by blocked burners or a faulty ignition switch, costing £50-£120 to fix.
• Low flame: May result from a gas supply issue or clogged jets, with repair costs of £60-£150.
• Spark module failure: Replacing a defective module costs between £100-£200.
• Gas smell: A gas leak requires immediate attention from a Gas Safe engineer, costing £65-£100 in call-out fees plus more for repairs.

How long should hobs last?

A well-maintained hob should last 10–15 years, with gas and electric models typically outlasting induction hobs due to fewer electronic components. Regular cleaning and prompt repairs can extend your hob’s lifespan.

Why do hobs crack?

Cracks in hobs are often caused by:

• Impact damage: Dropping heavy objects onto the surface
• Thermal shock: Rapid temperature changes, especially in ceramic and glass hobs
• Wear and tear: Prolonged use can weaken the surface over time

While small cracks may not immediately affect performance, they can worsen and pose safety risks. It’s always best to get cracks to your hob repaired as soon as they appear to prevent further damage, which may be more costly to fix.

Do plumbers fix gas hobs?

Some plumbers are qualified to repair gas hobs, but you must ensure they are Gas Safe registered. This certification ensures they are trained to safely handle gas appliances. For electric or induction hobs, you’ll need an electrician or appliance repair specialist.

Can I fix my hob myself?

For minor issues, such as cleaning clogged gas burners or replacing knobs, you can attempt to fix your hob yourself. However, complex faults like wiring issues, coil replacements, or gas leaks require professional expertise. Attempting DIY repairs on gas or induction hobs can be dangerous, particularly with gas hobs, and may void warranties.

Is it worth repairing a hob?

Repairing a hob is generally worth it if the appliance is under 10 years old and the repair cost is less than 50% of the price of a new hob. High-end models with advanced features are also more economical to repair than replace. However, for older or budget models, replacing the hob may be more cost-effective.

By repairing rather than replacing, you can save money and reduce waste, supporting a more sustainable approach to home appliances. Always consult a professional to assess the fault and provide repair advice tailored to your hob type.

Need trusted hob repair services? Find qualified engineers near you on HaMuch today by posting your job with us. 

Estimates for common appliance repair specialist jobs;

Rates for other trades