Name: Heating Engineer
Brand: HaMuch
SKU: heating-engineer
Rating: 4.75 (20 reviews)

Find affordable Tadworth heating engineers

Prices range from cheapest £48/hour and £244/day (Dawid Palka & Plumbing) to £114/hour and £805/day (Akh heating and Plumbing) - average £75/hr and £411/day

HaMuch is Excellent

Local Tadworth heating engineers, reviews & latest jobs

"Boiler service" - KT20, job posted 07/09/26

"Install gas fire - Gazco Riva2 600 Conventional Flue Gas Fire" - REIGATE, job posted 26/08/26

"Replace a heating programmer - DANFOSS FP715SI PROGRAMMER" - STONELEIGH, job posted 24/08/26

"I need a gas hob disconnected for a kitchen renovation. The reconnected a week or two later. I know it’s not a big job, but I also know I can’t do it myself. I’m based in Reigate / Redhill." - RH2, job posted 02/08/26

"Boiler service" - SM7, job posted 07/05/26

"Boiler Service one off annual" - RH1, job posted 14/03/26

"We are getting huge gas bill due to some issues with our heating system, which includes under floor heating. Need to check ." - SM7, job posted 22/12/25

"We are getting huge gas bill due to some issues with our heating system, which includes under floor heating. Need to check ." - REIGATE, job posted 22/12/25

"New boiler installation" - REIGATE & BANSTEAD, job posted 03/12/25

"Kitchen extractor Hood duct is required to replace this duct and the outside vent with a flexible 150mm dia duct or if possible use a rigid ducting system" - SM2, job posted 26/11/25

"New boiler installation" - KT17, job posted 25/09/25

"Electic heating not working" - REDHILL, job posted 24/09/25

"Replace a hot water immersion heater - Tesla T-Smart Immersion Heater 350mm" - SM3, job posted 20/07/25

"Boiler service" - CR5, job posted 22/06/25

"Good afternoon, I hope you well. Please could you provide me with a quote to screed my ground floor which is 70sqm @30-50mm deep. Many thanks" - KT17, job posted 14/05/25

"Cap off a gas fire, in Hooley CR5 3RP" - REIGATE & BANSTEAD, job posted 20/01/25

"I am writing to inform you of an issue with my boiler and to request assistance in replacing the pump. Following an inspection by a certified engineer, it was advised that the pump needs to be replaced to resolve the ongoing issues." - KT18, job posted 17/01/25

"Connect a gas hob just need pipe work extending" - RH1, job posted 03/12/24

"Service a gas fire Moved house year ago want see if gas fire ok" - REIGATE & BANSTEAD, job posted 18/11/24

"Replace an unvented hot water cylinder" - KT20, job posted 15/10/24

What are the best ways to avoid problems when paying the Heating Engineer?

The most important thing is do avoid handing over cash or paying large sums in advance. Be wary of paying cash for a cheaper job, i.e. to avoid VAT, you may be going down a slippery slope of not doing things properly which may eventually mean your job is also not done properly.

Agree when you intend to pay, ideally after you are satisfied with the completed job. If it is a big job agree a schedule of staged payments which is fair to both parties.

To avoid bad tradespeople and to ensure you can find them should they not answer a mobile;

Get proper contact details and check them yourself
Check if the company is verified on the Companies House website
Get phone details, ideally a land line or 0800 number and check it
Get a physical office address

Before the job starts should I agree standards of quality and behaviour?

Get quotes in writing by email or in person if possible. Getting quotes online or by text is ok (make sure you accept the offer by replying). For large projects make a written agreement, schedule of works and snagging plans as part of a working document. Also;

Agree expected quality of workmanship and materials in advance
When will work start and when will project be finished, what happens if project over runs ?
How long is the guarantee on work and materials eg 12 months
Discuss onsite behaviour in advance (no smoking, swearing or using mobile phones for non-work purposes)
Agree that your Heating Engineer will remove all debris and rubbish and what level of tidying up you want after job

Compare Tadworth heating engineers rates

Compare Tadworth heating engineers rates (excluding VAT or callout charges)
Location in UK	Hourly Rate	Daily Rate
Heating Engineers near Tadworth	£66	£339
Heating Engineers near Reigate & Banstead	£66	£339
Heating Engineers near Epsom	£68	£352
Heating Engineers near Reigate	£67	£346
Heating Engineers near Redhill	£67	£340
Heating Engineers near Ewell	£70	£353
Heating Engineers near Sutton	£69	£350
Heating Engineers near Great Bookham	£63	£333
Heating Engineers near Caterham	£66	£328
Heating Engineers near Esher	£68	£351

Job estimates from heating engineers near you

With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.

Need a Landlord gas safety certificate - £98

Boiler Insurance - £146 per month

Install heated skirting boards - £1,404

LPG boiler installation - £1,540

Install biomass boiler - £5,356

Install hydrogen boiler - £1,408

Install chimney liner - £538

Install gas fire - £811

Service a gas fire - £204

Cost to move / relocate boiler - £1,056

Fit a magnetic filter - £178

Connect a gas cooker or hob - £216

Central heating circulator pump replacement - £331

Replace an oil boiler - £2,602

Heating oil tank installation - £1,262

Install an air source heat pump - £6,321

Install a ground source heat pump - £15,093

Fit underfloor heating - £1,232

Fix a boiler fault code - £136

Powerflush - £579 Visit

Replace a heating programmer - £223

Fit smart heating controls - £271

Fit a radiator - £200

Replace a hot water immersion heater - £380

Boiler repair - £156

Boiler service - £98

Fit a heated towel rail radiator - £248

Fit or replace an unvented hot water cylinder - £2,373

Install a new boiler - £1,622

Fit or replace a vented hot water cylinder - £638

Fit thermostatic radiator valves, Danfoss RAS-C2 - £167

More heating cost guides...

People in Tadworth searching for a Heating Engineer also viewed...

Painter and Decorator

The Largest Database of UK Trade Rates

At HaMuch we know what tradespeople charge because we have the largest database of rates anywhere in the UK. If you want quotes for jobs at the right price for you, post your jobs with HaMuch and get your home improvements kickstarted straight away!

Appliance Repair Specialist

Conservatory Specialist