Replace light fittings Replace light switches Relocate light fittings

Add a new plug socket Move light switch closer to the door for easy access Change fluorescent tube to LED lighting or something more suitable.

Fit an outside double socket

Reliable electrician required for w/c 13th June for: - Wiring and installation of approx 10 ceiling spotlights - Changing current single socket to a double - Relocating 2 x light switches - Relocating 4 x sockets - Ensuring sockets for new induction hob are sufficient - Removal off sockets no longer required x 3

Full house rewire for 3 bedroom semi detached

We need a licensed electrician to attend a site survey with an engineer to prepare a quote for the movement of fuse spurs. The site contact will escort the electrician and engineer to the locations that will need to be relocated.

I need a 415V three-phase supply for a single machine, but I only have access to a 240V single-phase power supply. I’m looking for a solution that avoids a full utility upgrade to three-phase power

Please provide a material and labour cost for each element? How long will it take to complete the entire job and when can you start? Job specification: Replace the consumer unit. No main isolator adjacent origin of supply, consumer tails need suport. Inspection Schedule Item 1.3: Consumer's meter tail. Inspection Schedule Item 1.2: Consumer's isolator (where present) is recommended for improvement. Inconsistent ring continuity readings, earth reading above predicted. No bonding of metal switch plates. No bonding metal back box to socket. Replace the socket circuit. Install the bathroom fan. There is a transformator left outside and over the bathroom. There is no fun inside, only the hole left in the wall. Correct identification of circuit details and protective devices (514.8.1; 514.9.1) RCD(s) provided for additional protection/requirements - includes RCBOs (411.3.3; 415.1). For the supply of mobile equipment not exceeding 32A rating for use outdoors (411.3.3). For cables concealed in walls at a depth of less than 50mm 522x xx ; 522x xx ). Final circuits supplying luminaires within domestic (household) premises (411.3.4) Additional protection for all low voltage (LV) circuits by RCD not exceeding 30mA 7014 xxx ). Presence of supplementary bonding conductors, unless not required by BS 7671:2018 701x xx ). 3 bedroom house (ground and 1st floor).

fusebox keeps tripping out, I called an emergency electrician and he said he believes a random wire has been bitten into by a rat/mouse... he got half of the house wall sockets working and said I need to get to

My main fuse box circuit fuse keeps tripping out? (wall sockets) I plugged out then In everything individually to see if I could locate the cause but I havent had much luck.? I called a callout electrician to fault find? He said " my downstairs ring main is the problem and the fault needs a more careful inspection to locate the cause".. the house is wired by 2 ring mains 1 for all ceiling lights and 1 for all wall sockets he split the socket ring main in two and got half the house wall sockets working and left .. I need an electrican to find the cause and recitify on the sockets that are not working plz..

2 Additional sockets Change light fitting Remove panic alarm Change light switch ?wireless switch

My house was built in 1975 in the Morley LS27 area of Leeds. It has an outdated fuse box at the top of the main door entrance (box size 15cm x 20 cm approx). I want to change it to the consumer unit with a surge-protected Rcbo consumer unit. Also, there are 3 sockets in the kitchen that have high zs reading. Both are marked as C2 in the EICR report. How much will it cost to fix? Thanks

Socket for fridge not working, needs replacing

I needed 2 double plug sockets fitting next to the TV for all cables.

Water ingress from flat above into bathroom light. Allowed time to dry and switched light on. Possible short (?) blowing both light rings, so now no lighting at address.

Install 2 400volt sockets with wiring

Full house rewire 1900 built 2 bed terrace with cellar. Property is not presently occupied

Lights keeps cutting out

Hi, we recently had a RCBO unit installed however, the socket circuit is now tripping and in result, only 1-2 sockets are working and there is no hot water supply. How much will it cost to investigate and resolve?

We need help with electrical part of our kitchen installation. The old kitchen was fully functional. We are adding a dishwasher and revise the old installation.

Fit 9 new sockets and wiring for kitchen appliances

Need change of 1 power socket living room

Replacing single phase fuse board

Fit 9 smart sockets and 9 smart switches

The cable connecting to my speaker in the bathroom is broken and it’s at the ceiling’s corner which is hard to reach without stairs.

We've got a house of 5 flats. We're all lessees and our freeholder has served an s20 notice for some work. if possible, please come round to inspect the job and submit some quotes forward for the work and i shall recommend you for it to the freeholder. it's to commence in about a month’s time. below are some details of it. the perimeter around the house is 27 metres in length - that's the wall but the house itself is smaller than that. thanks. All fire precautions works are to be undertaken by workmen with previous experience in fire precaution works. 6.1.2 All electrical work is to be carried out by a NICEIC registered electrician and to comply with Part P of the Building Regulations. 6. 1.3 All cables are to be chased into the pipework where appropriate to do so. Surface mounted cables should be avoided. Should they be required, cables should be neatly trimmed inside slimline PVC trunking. - Provisional: New Grade A LD2 Fire Alarm System The contractor is to employ a specialist Fire Alarm installation company to fully design and install a Fire Alarm System that complies with all current legislation. 6.2.3 Within the commonway allow to undertake the works outlined below: 6.2.4 Disconnect and strip out the existing fire alarm system to include all cabling, sensors and panelling. Cart waste from site. 6.2.5 Provide and install a new LD Grade A optical smoke detection system fully compliant with BS 5839 6xxx Parts 1 & 6. 6.2.6 All cables are to be concealed as far as practicable. Any exposed cables are to be fitted in PVC trunking in locations to be agreed with CA/surveyor. - emergency Lighting in corridors - Upgrading Flat Entrance Doors by a TRADA approved contractor - new 44mm half hour fire resisting door in accordance with British Standard 8214:2016 Code of Practice for fire doors. - NICEIC electrician to inspect the electrical consumer units, meters and mains cables within the ground floor cupboard and report findings back to the CA/surveyor.

We've got a house of 5 flats. We're all lessees and our freeholder has served an s20 notice for some work. if possible, please come round to inspect the job and submit some quotes forward for the work and i shall recommend you for it to the freeholder. it's to commence in about a month’s time. below are some details of it. the perimeter around the house is 27 metres in length - that's the wall but the house itself is smaller than that. thanks. All fire precautions works are to be undertaken by workmen with previous experience in fire precaution works. 6.1.2 All electrical work is to be carried out by a NICEIC registered electrician and to comply with Part P of the Building Regulations. 6. 1.3 All cables are to be chased into the pipework where appropriate to do so. Surface mounted cables should be avoided. Should they be required, cables should be neatly trimmed inside slimline PVC trunking. - Provisional: New Grade A LD2 Fire Alarm System The contractor is to employ a specialist Fire Alarm installation company to fully design and install a Fire Alarm System that complies with all current legislation. 6.2.3 Within the commonway allow to undertake the works outlined below: 6.2.4 Disconnect and strip out the existing fire alarm system to include all cabling, sensors and panelling. Cart waste from site. 6.2.5 Provide and install a new LD Grade A optical smoke detection system fully compliant with BS 5839 6xxx Parts 1

Sockets not working

Hi I would like a upgrade on fuse board and new sockets around the house

To confirm if electricity is disconnected in my garage and require a certified document to say that.