Range from the cheapest fitting of TRVs (thermostatic radiator valves) £64 (JC Plumbing Scotland based in ML10) to the dearest fitting of TRVs£122 (BriCal Plumbing & Heating Ltd based in ML1).
From £139
BriCal Plumbing & Heating Ltd is a one-stop solution for all your heating engineering needs. Establish over 10 years ago and covering 20 miles arou...
From £103
Family owned and run business
worcester Bosch approved installer
From £129
Approved heating engineer in Larkhall, covering 20 miles.
Whatever heating engineering work you need, including emergency repairs, hire a co...
From £127
With extensive heating engineering experience, we provide reliable, high-quality workmanship at competitive prices. The Scottish Boiler Company und...
From £81
We are reliable and complete the job on time with good quality workmanship all the time
From £121
Experienced heating engineer ready to quote for your work. Cowan Plumbing & Heating is the best heating engineer in Larkhall. No obligation free qu...
From £131
Fast response for all your heating engineering needs around Larkhall
Riga Heat are an established and experienced hea...
From £133
Relax... you have found a reliable heating engineer in Larkhall. Neil Murphy is a friendly and reliable company based in Larkhall who consider no j...
From £129
Aire Plumbing & Heating Ltd is an established and experienced local heating engineer in Larkhall. Please contact us for a free, no obligation quote...
From £133
Fast response for all your heating engineering needs around Larkhall
James Henderson are an established and experienc...
Comparing heating engineers estimates for fitting a Danfoss, Pegler or Hive TRV gives you an idea of who will be better value but the best way to compare costs is to get quotes.
What to do - Get rates and quotes to fit TRVs in Larkhall by posting a job on HaMuch and we will send it to heating engineers in Larkhall.
*All prices are estimates based on the hourly or day rate of heating engineers in Larkhall, UK TRV offers and materials.
"Fit thermostatic radiator valves, Danfoss RAS-C2" - ML1, job posted 01/01/70
| Location in UK | Hourly Rate | Daily Rate |
|---|---|---|
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Larkhall | £46 | £316 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Wishaw | £50 | £321 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Motherwell | £50 | £331 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Bellshill | £51 | £339 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Viewpark | £52 | £343 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near South Lanarkshire | £47 | £299 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Blantyre | £49 | £330 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near East Kilbride | £49 | £326 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Coatbridge | £51 | £337 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near North Lanarkshire | £52 | £340 |
With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.
Fit underfloor heating - £1,134
Service a gas fire - £137
Replace a heating programmer - £201
Powerflush - £424 Visit
Heating oil tank installation - £1,213
Replace an oil boiler - £2,504
Install a new boiler - £1,524
Install heated skirting boards - £1,306
LPG boiler installation - £1,442
Install hydrogen boiler - £1,212
Install gas fire - £762
Install chimney liner - £489
Install biomass boiler - £5,209
Install a ground source heat pump - £14,360
Fix a boiler fault code - £92
Fit smart heating controls - £227
Fit a magnetic filter - £134
Fit a radiator - £155
Connect a gas cooker or hob - £149
Boiler service - £76
Boiler repair - £112
Boiler Insurance - £102 per month
Install an air source heat pump - £6,223
.jpg?v=1)
