From £121
Billy Clews Heating is a one-stop solution for all your heating engineering needs. Establish over 10 years ago and covering 20 miles around CW11 w...
From £145
With extensive heating engineering experience, we provide reliable, high-quality workmanship at competitive prices. Trids Gas and Plumbing Ltd unde...
From £121
With extensive heating engineering experience, we provide reliable, high-quality workmanship at competitive prices. AHMED SHAMIM TALUKDAR understan...
From £133
Fast response for all your heating engineering needs around CW11
Greg Gas LTD are an established and experienced heat...
From £143
With extensive heating engineering experience, we provide reliable, high-quality workmanship at competitive prices. Heato Ltd understands the impor...
From £121
Apex Gas Services prides in delivering an excellent heating engineering service and value for money in CW11 and the surrounding areas. Our goal is...
From £117
With extensive heating engineering experience, we provide reliable, high-quality workmanship at competitive prices. AJM Gas Services understands th...
From £133
Get a Heating Engineer in CW11 who you can trust. NTS Plumbing and Gas provide friendly and reliable heating engineering services to the CW11 area,...
From £115
APD Plumbing and Heating is a one-stop solution for all your heating engineering needs. Establish over 10 years ago and covering 20 miles around CW...
From £131
B M R Heating & Plumbing is a one-stop solution for all your heating engineering needs. Establish over 10 years ago and covering 20 miles around CW...

Comparing heating engineers estimates for fitting a Danfoss, Pegler or Hive TRV gives you an idea of who will be better value but the best way to compare costs is to get quotes.
What to do - Get rates and quotes to fit TRVs in CW11 by posting a job on HaMuch and we will send it to heating engineers in CW11.
*All prices are estimates based on the hourly or day rate of heating engineers in CW11, UK TRV offers and materials.
"Fit thermostatic radiator valves, Danfoss RAS-C2" - CW1
| Location in UK | Hourly Rate | Daily Rate |
|---|---|---|
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Crewe | £41 | £251 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Crewe & Nantwich | £41 | £251 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Congleton | £38 | £239 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Winsford | £38 | £238 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Newcastle-under-Lyme | £41 | £250 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Stoke-on-Trent | £41 | £252 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Macclesfield | £38 | £237 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Wilmslow | £42 | £249 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Leek | £38 | £237 |
| Fit Thermostatic Radiator Valves, Danfoss RAS-C2 near Altrincham | £41 | £265 |
With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.

Fit underfloor heating - £1,109

Service a gas fire - £146

Replace a heating programmer - £204

Powerflush - £443 Visit

Heating oil tank installation - £1,201

Replace an oil boiler - £2,479

Install a new boiler - £1,499

Install heated skirting boards - £1,281

LPG boiler installation - £1,417

Install hydrogen boiler - £1,162

Install gas fire - £750

Install chimney liner - £477

Install biomass boiler - £5,172

Install a ground source heat pump - £14,172

Fix a boiler fault code - £97

Fit smart heating controls - £232

Fit a magnetic filter - £139

Fit a radiator - £161

Connect a gas cooker or hob - £158

Boiler service - £79

Boiler repair - £117

Boiler Insurance - £107 per month

Install an air source heat pump - £6,198