An unvented hot water cylinder is a great option if you want to get rid of your water storage tank in the loft and improve your water pressure. But how much does it cost to install one in Tilehurst?
Ideal Thermstore indirect pre-plumbed cylinder system 210ltr
From £2,165
Professional property maintenance services in Reading and surrounding areas.
From £2,329
I am Ben Farley of BF Heating Services. I am gas safe registered and I am able to offer services including boiler installation, service repair and ...
From £2,321
Tilehurst, RG30
Fast response for all your heating engineering needs around Tilehurst
Wojciech Ekstowicz are an established and exper...
From £2,225
Best Quotes Ltd offers the very best prices and fast boiler installations and repairs on all Worcester Bosch products. We cover Reading, Berkshire ...
From £2,345
Tilehurst, RG30
Surefire Gas Services is a one-stop solution for all your heating engineering needs. Establish over 10 years ago and covering 20 miles around Tileh...
From £2,515
Yarnold Heating and Plumbing Ltd prides in delivering an excellent heating engineering service and value for money in Tilehurst and the surrounding...
From £2,179
Hello! (Joe Ling. RHS. 07766790815)
Reading Heating Solutions is a local company, based within Tilehurst in Re...
From £2,319
Relax... you have found a reliable heating engineer in Tilehurst. Gordons Plumbing & Heating is a friendly and reliable company based in Tilehurst ...
From £2,379
Experienced heating engineer ready to quote for your work. Home Heating Company is the best heating engineer in Tilehurst. No obligation free quote...
Prices for the installation of unvented hot water cylinders like Megaflo in Tilehurst range from the cheapest of £996 (Reading Handyman Services based in RG30) to dearest of £1,346 (Yarnold Heating and Plumbing Ltd based in RG1), but these are just estimates. Comparing heating engineers estimates gives you an idea of who will be better value but the best way to compare costs is to get actual quotes.
Get rates and quotes to install an unvented hot water cylinder in Tilehurst by posting a job with HaMuch and we will send it to heating engineers in Tilehurst.
| Location in UK | Hourly Rate | Daily Rate |
|---|---|---|
| Fit Or Replace An Unvented Hot Water Cylinder near Reading | £62 | £314 |
| Fit Or Replace An Unvented Hot Water Cylinder near Caversham | £61 | £314 |
| Fit Or Replace An Unvented Hot Water Cylinder near Woodley | £62 | £316 |
| Fit Or Replace An Unvented Hot Water Cylinder near Wokingham | £61 | £312 |
| Fit Or Replace An Unvented Hot Water Cylinder near Thatcham | £62 | £312 |
| Fit Or Replace An Unvented Hot Water Cylinder near Bracknell Forest | £58 | £304 |
| Fit Or Replace An Unvented Hot Water Cylinder near Bracknell | £59 | £304 |
| Fit Or Replace An Unvented Hot Water Cylinder near Sandhurst | £61 | £310 |
| Fit Or Replace An Unvented Hot Water Cylinder near Basingstoke & Deane | £60 | £303 |
| Fit Or Replace An Unvented Hot Water Cylinder near Basingstoke | £59 | £304 |
With energy prices rising, it’s important to do all you can to keep your bills as low as possible. And if you’ve got an old boiler, it could be wasting your money. But how much will it set you back to replace your boiler? We’ve got the answer plus costs for other heating sources like ground and air source heat pumps in our cost guides.
Fit underfloor heating - £1,137
Service a gas fire - £200
Replace a heating programmer - £222
Powerflush - £570 Visit
Heating oil tank installation - £1,214
Replace an oil boiler - £2,507
Install a new boiler - £1,527
Install heated skirting boards - £1,309
LPG boiler installation - £1,445
Install hydrogen boiler - £1,217
Install gas fire - £763
Install chimney liner - £490
Install biomass boiler - £5,213
Install a ground source heat pump - £14,378
Fix a boiler fault code - £133
Fit smart heating controls - £268
Fit a magnetic filter - £175
Fit a radiator - £197
Connect a gas cooker or hob - £212
Boiler service - £97
Boiler repair - £153
Boiler Insurance - £143 per month
Install an air source heat pump - £6,226
.png?v=1)
