08 Mar 21
Consumer unit change, Currently rewirable fusebox serving 5 circuits (on 3 way board) looking to replace due to the need for expansion in the future with the addition of a further 3 circuits in the future following a replacement kitchen and potential extension. (Kitchen Sockets, Cooker and Extension to be added at a later date, currently two lighting circuits to a single fuse way, radial and a ring on a 32 amp fuse and a shower on a 40 amp way) Ideally looking to replace with a 10way SPD, RCBO board. (I can provide a type A RCBO, SPD CP Fusebox Board for around £130 as I have a friend who works at a wholesaler). Bonding was updated to 10mm recently and there is a DP main isolator fitted after the meter at the property. TNCS earthing arrangement and 60 Amp main cutout fuse in place.
29 Jan 21
Upgrade from a Rewirable Fusebox to RCBO SPD CU in a terrace property. Currently Serves 5 Circuits with 3 ways (2 Lights, 1 Radial, 1 Ring Final and a shower) (10 Way CU to allow for expansion - addition of an oven circuit, kitchen ring final and a potential extension in the near future) Currently 10mm bonding and 16mm tails in place (60 Amp Main Cut Out fuse). Currently an isolation switch present after the meter.