I want to lay a concrete foundation for a greenhouse

To lay a concrete base 7’ x 5’ for a greenhouse

To lay a concrete base for greenhouse

bed room and bath room

Unsure if drip groove / channel exists on window sill (too high to see and windows don't open on lower half so cannot check) - possibly causing water to run onto wall as some signs of a little damp under internal window sill. Victorian building, 1st floor.

New kitchen installation

Build a bulkhead /box in in ceiling with access panel and insulation

Add bathroom. We would like to divide our spare bedroom so that it becomes a bedroom and a bathroom.

want to build a garden office outdoors .

Hopper pipes rodding and licence

Hallway subfloor wood in pieces after leak repair on pipes. Approx 1m x 2m, needs to be replaced. Need to have battoning screwed to concrete floor so boards no rest directly on pipes. Then marine ply fitted. Location of problem is by front door, with secondary fire door right next to it. Ground floor flat.

Painting and floors (tiles)

Change laminate floor

All jobs for joist and check floor boards

Broken window. Single glazing. 88cm tall x 72cm wide. Balham, sw12

Prepare and Lay patio bricks 50m2 Finish a flat roof by installing down pipe and gutter and lay bricks Install flashing around new built house

Take down existing ceiling (including removal of existing resilient bars), install new soundproofing on ceiling including: sound isolation clips, channels, rockwool, 2 layers of acoustic drywall with MLV. Seal edges with acoustic sealent. Also worried about noise passing through walls, so would be happy to discuss possible treatments for that.

Work: ( looking for experience builder/ plumer/electrician) -Change shade roof -Replacing kitchen cupboard -Replacing shower -kitchen tile replacement - kitchen painting (1 room) - electrical work at the toilet( on light wiring ) - Also, looking for Plumer for leakage

I need a builder who can install an ikea kitchen in a rental flat in Brixton within the next two weeks

remove a 30 x 10 cm layers of concrete a round a sink pipe.

To pasterboard ceiling

Water leakage at the shed need repair

replace 2 panes of glass on a sash window

To fix broken wall and pillar in front gardenfront garden wall/pillar broken To remove Satellite TV fixture from wall and lounge & repair To fix chipped drainage opening in front of house

I am looking to have two mirrors hanged. I have one already and I am waiting for the other one to arrive which will be around the 7th of July.

To supply and install a suspended fire rated plasterboard ceiling throughout to comply with building regulations (200m approx); joints taped and filled to receive decoration upon completion. To allow for an access panel to the ceiling void and 40db rating sound above the 3 surgeries and decontamination room. Ceiling height to be kept maximum height as possible and all one level with downstand bulkheads around beams and ductwork where necessary. Generally floor to ceiling height to be 2400mm where possible keeping void above suspended ceiling below 800mm (ceiling height 3200mm at highest point) Supply and construct floor to ceiling stud wall partitions (as shown on plan) to include sound insulation to cavity. Joints taped and filled leaving ready to receive decorative finish upon completion. The partition walls to achieve minimum fire rating to comply with current fire regulations. To ensure columns present are boxed in as shown on plans. OPG room to have one layer of stud wall to Code 3 (1.32mm to BSEN12588 or BBA equivalent) lead plasterboard as shown on drawing provided by RPA (in purple). The three surgeries to have one layer of plasterboard as Knauf Safeboard from floor level to a height of 2.0m in areas marked on drawing approved by RPA (in orange). Provisions made in stud walls to accommodate doors as shown on layout plan. Vertical timber batons in three walls (surgeries) to support wall mounted x-ray units

Trip switch is tripping the property Managed by plusheat

New bathroom install needed. Job will require removal of existing toilet, bath and sink and installation of new toilet, bath and sink. We also need the floors and part of the wall tiled. The size of the floor is 5m squared and the tiles we need installing are 25cm x 25cm. The walls that need tiling are 12m squared in total (two walls) and the tiles to go on the walls are 15 x 90cm.

fit wood flooring in hoouse

renew seal mastic bathroom bath and area and paint ceiling with anti-mould, paint existing AND door lock change barrel provided,

Need a fence post fixed

Ground floor flat needing to damp proof a cellar. We also require some repairs done on a window and some other minor fixes to fitting inside.

Flat in London with carpet. Need to revamp and change things with wood/laminate/tile/vinyl flooring.

Dig up existing resin-bound covering, prepare for and lay a good artificial grass

The handle was broken, it needs a new one

Breeze block wall with 2 number wooden access doors in requires removing, while other works are carried out and then re-building.

Bathroom basin plug hole stopper stuck

kitchen repairing work

I NEED A GAS ENGINERIEN TO GIVE ME QUOTE FOR INSTALL NEW COMBI OR I CAN BUY THE MATERIAL HE CAN CHARGE ONLY LABOUR

Damp walls and mould growth.not sure if it’s my roof

It says it takes 1.5 hours with 2 people. This is the bed: https://www.groupon.co.uk/deals/end-lift-ottoman-storage-bed-28

Just want to concrete my garden

Semi-detached Victorian

Flat want to build a wall

Hi, we are looking for someone to install a new bathroom in our flat and renew it completely, tiling the floor and walls. We need to replace the basin, toilet and bath, but no structural changes. The size of the bathroom is 3.5m2. Would it be possible to get a quote for this? The flat is in Battersea. Thank you Alfredo

Council flat with severe water damage to the ceiling. Need a temporary fix / ceiling replacement to last 6 months, ideally with some kind of solution for the leak as well.

In need to either turn one bedroom in en-suite (own shower cabin, toilet and sink) or to build a separate toilet in the landing.

Flat in wapping. We need a bunch of renovation works including. - Removal of partition wall in the kitchen - Installation of new alcove cupboards - Resurfacing of kitchen wall - Removal and refit of kitchen ceiling - Installation of new kitchen (units, appliances, tiling and electrics only - not countertops). The units come pre-built so are quick to install. - Installation of new lighting (1 in the kitchen over the kitchen island, 2 in the bedroom on the wall as bedside lights, 1 extra on the wall in the living room, and 1 above the living room on a very high ceiling) - Installation of two new electric radiators - Replacement of all light switches and sockets with brass ones - Removal of old electrical sockets (5 in total) and resurfacing of the wall behind it - Sanding and resurfacing of windowsill and fixing of holes beneath windowsill

Steel frame to replace loadbearing stud wall in victorian house. 1 new stud wall and lesser studwork to square up 2 rooms. New unvented cylinder and removal of redundant plumbing/reworking of some existing. New bathroomx2 (plumbing, electrics, tiling). Plumbing of new radiators and moving a few light fittings. Making good & plasterboard patching.

refurbishment of empty ground floor flat with garden

2 bedroom, 2 bathroom flat in Victorian mansion block; will need to remove carpet in both bedrooms and replace it with new carpet; also considering repainting all walls in the flat (5 rooms); would appreciate quotes for both tasks

Room decoration/painting

I am looking to paint 6 exterior windows. The windows need preparation work and some need the putty replaced. There is scaffolding already in place so no ladders required.

I have small garden and I need it slabbing.

Damp in master bedroom

to customise/rebuild two large outside drains

We are in need to move our washing machine away from the kitchen to be repositioned on our downstairs bathroom (that would require some wiring and plumbing), also creating a wardrobe to fit it and to move the bathroom radiator.

I am doing a loft extension. The dormer roof is 5m x 4m. I have bought felt for 3 layer torch on. Venting base layer, SBS base layer, SBS Technatorch torch on Cap sheet. I am now considering bottling out of doing the roof myself as I’ve done felt roofs before (2 layers with hot barrel of bitumen) but never “torch on” and I don’t want to balls it up.